Home

Requirements September 1993 until January 2009

1. Format four sheets of drawing paper (or two sheets of paper if you are completing requirement 3) with proper borders and title blocks for your projects.

(a) Make a rough sketch of your project drawings to determine the correct size of paper to format.
(b) Using single-stroke vertical or slant Gothic lettering, fill in all important information in the title block sections of the formatted paper.

Complete requirement 2 or 3 for your drawing projects.

2. Prepare two of the following pencil drawings for reproduction, using two of the formatted sheets of paper and being sure to fill in the title block information.

(a) Architectural: Make a rough sketch of a room. From it, make a finished scale floor plan. Using conventional symbols, show all openings, equipment, lights, and safety devices. Use an architectural scale size.
(b) Mechanical: Make a scale drawing of some piece of craft work or interesting object. Use the orthographic projection technique to show at least three views. Use dimension lines to show the actual size.
(c) Electrical: Draw a simple schematic of a radio or electronic circuit. Properly print a bill of materials of the major electronic parts of the radio or circuit. Use standard drawing symbols for the electronic components.

3. Using a CAD (computer-aided drafting) system, prepare and plot one of the drawings in requirements 2a, 2b, or 2c. Create the format (border and title clock) on the computer before starting the drawing.

4. Using a formatted sheet of paper, prepare an isometric drawing of something not drawn in requirement 2 or 3. On the drawing, list which instruments you used.

5. Lettering: Using single-stroke vertical or slant Gothic lettering, describe in forty words or less why CAD is used in a particular industry (aerospace, electronics, architectural, or other). Use the 8-1/2 by 11 inch formatted sheet.

6. Describe the three most common methods of reproducing pencil drawings. Describe one method of reproducing a computer drawing. Make copies of one of your drawings using one of these methods.

Requirements January 2009 until January 2015

1. Format two sheets of drawing paper with proper borders and the blocks – one for your manual project (see requirement 2) and one for your lettering project (see requirement 5).

(a) Make a rough sketch for each of your project drawings to determine the correct size of paper to format.
(b) Using either single-stroke vertical or slant Gothic lettering, fill in all important information in the title block sections of the formatted paper.

2. Using the formatted sheet of paper you prepared for your manual project, produce a pencil drawing as if it would be used for manufacturing. Fill in all title block information. The manual drawing may be one of the following drawing types:

(a) Architectural: Make a scale drawing of an architectural project. The architectural drawing may be a floorplan; electrical, plumbing, mechanical service plan: elevation plan: or landscaping plan. Use the architect scale and show dimensions to communicate the actual size of features. Include any important notes and considerations necessary for construction.
(b) Mechanical: Make a scale drawing of some mechanical device or interesting object. The mechanical drawing may be of the orthographic or isometric style. Use an engineer scale and show dimensions to communicate the actual size of features. Include any important notes and manufacturing considerations.
(c) Electrical: Draw a simple schematic of a radio or electrical circuit. Properly print a bill of materials including all the major components used in the circuit. Use standard drawing symbols to represent the electric moments.

3. Produce a computer aided design (CAD) drawing as it would be used in manufacturing. Fill in all title block information. The CAD drawing may be any one of the following drawing types.

(a) Architectural: Make a scale drawing of an architectural project the architectural drawing may be a floorplan: electrical, plumbing, or mechanical service plan; elevation plan; or landscaping plan. Using architects scale and show dimensions to communicate the actual size of features. Include any important notes and considerations necessary for construction.
(b) Mechanical: Make a scale drawing of some mechanical device or interesting object. The mechanical drawing may be of the orthographic or isometric style. Use an engineer scale and show dimensions to communicate the actual size of features. Include any important notes and manufacturing considerations.
(c) Electrical: Draw a simple schematic of a radio or electronic circuit. Properly print a bill of materials including all the major electrical components used in the circuit. Use standard drawing symbols to represent the electronic components.

4. Discuss with your counselor how filling requirement 2 and 3 different from each other tell about the benefits derived from using CAD for requirement 3. Include in your discussion the software you used as well as other software options that are available.

5. Using single-stroke slant for vertical Gothic lettering (without the aid of a template for lettering guide), but a brief explanation of what you consider to be the most important benefit in using CAD in a particular industry (aerospace, electronics, manufacturing, architectural, or other). Use the experience gained in fulfilling requirements 2, 3, and 4 to support your opinion. Use the formatted sheet of paper you prepared in requirement 1 for your lettering project.

6. Do one of the following (a or b):

(a) Visit a facility or industry workplace word drafting is part of the business. Asked to see an example of the work that is done there, the different drafting facilities, and the tools used.

(1) Find out how much of the drafting there is manual and how much is done using CAD. If CAD is used, find out what software is used and how and why it was chosen.
(2) Ask about the drafting services provided. Haskell uses the designs produced in the drafting area and how those designs are used. Discuss how the professionals who performed drafting cooperate with other individuals in the drafting area and other areas of the business.
(3) Ask how important the role of drafting is to producing the end product or service that this business applies. Find out how drafting contributes to the companies in product or service

(b) Using resources you find on your own such as the library and on the Internet (with your parent’s permission), learn more about the drafting trade and discuss the following with your counselor.

(1) The drafting tools used in the past – why and how they were used. Explain which tools are still used today and held their uses changed with the advent of new tools. Discuss which tools are being made obsolete by newer tools in the industry.
(2) Tell what media types for use in the past and how drawings were used, stored, and reproduced. Tell how the advent of CAD has changed the media used, and discuss how these changes affect the storage or reproduction of drawings.
(3) Discuss whether the types of media have changed such that there are new uses for the drawings, or other outputs, produced by designers. Briefly discuss how the new media types are used in the industry today.

7. Find out about three career opportunities in drafting. Pick one and find out the education, training, and experience required for this profession. Discuss this with your counselor, and explain why this profession might interest you.